Olympus FE-115 (xD memory card) & FreeBSD 7.0

[Daemony]

Hi!

FreeBSD 7.0-RELEASE

Here's a digital photocamera Olympus FE-115 (USB) with xD picture card. When I plug it in USB port:

$ cat /var/log/messages | grep umass
Nov 15 06:44:42 lonestar kernel: umass0: <OLYMPUS FE115/X715, class 0/0, rev 1.10/0.00, addr 2> on uhub1
Nov 15 06:44:42 lonestar kernel: umass0: BBB reset failed, STALLED
Nov 15 06:44:42 lonestar kernel: umass0: BBB bulk-in clear stall failed, STALLED
Nov 15 06:44:42 lonestar kernel: umass0: BBB bulk-out clear stall failed, STALLED
Nov 15 06:45:47 lonestar kernel: umass0: BBB reset failed, STALLED
...
Nov 15 06:46:05 lonestar kernel: umass0: BBB bulk-in clear stall failed, STALLED
Nov 15 06:46:05 lonestar kernel: umass0: BBB bulk-out clear stall failed, STALLED
Nov 15 06:46:05 lonestar kernel: umass0: BBB reset failed, STALLED
Nov 15 06:46:05 lonestar kernel: umass0: BBB bulk-in clear stall failed, STALLED
Nov 15 06:46:05 lonestar kernel: umass0: BBB bulk-out clear stall failed, STALLED
Nov 15 06:46:05 lonestar kernel: umass0: at uhub1 port 2 (addr 2) disconnected
Nov 15 06:46:05 lonestar kernel: umass0: detached


In my kernel config here's next devices:

device usb
device uhci
device ohci
device ehci
device scbus
device ch
device da
device sa
device cd
device pass
device ses

But photocamera are not working with PC. And not detected any new device in the system.

Any suggestions how to teach FreeBSD works with this camera? :(

[lyuts]

When I used my camera with FreeBSD I did the following.

After camera plugin (via USB) my camera is recognized as direct access device (da). Then I just mounted it manually.

[Daemony]

I know, that it should detect as da* device, but it didn't before. :(
But, in last try to attach camera, I wait few minutes and got in log:

Nov 17 13:17:36 lonestar kernel: umass0: <OLYMPUS FE115/X715, class 0/0, rev 1.10/0.00, addr 2> on uhub1
Nov 17 13:17:36 lonestar root: Unknown USB device: vendor 0x07b4 product 0x0109 bus uhub1
Nov 17 13:17:36 lonestar kernel: umass0: BBB reset failed, STALLED
Nov 17 13:17:36 lonestar kernel: umass0: BBB bulk-in clear stall failed, STALLED
Nov 17 13:17:36 lonestar kernel: umass0: BBB bulk-out clear stall failed, STALLED
Nov 17 13:18:41 lonestar kernel: umass0: BBB reset failed, STALLED
...
Nov 17 13:23:51 lonestar kernel: umass0: BBB bulk-out clear stall failed, STALLED
Nov 17 13:23:51 lonestar kernel: (da0:umass-sim0:0:0:0): got CAM status 0x4
Nov 17 13:23:51 lonestar kernel: (da0:umass-sim0:0:0:0): fatal error, failed to attach to device
Nov 17 13:23:51 lonestar kernel: (da0:umass-sim0:0:0:0): lost device
Nov 17 13:23:53 lonestar kernel: umass0: BBB reset failed, STALLED
...
Nov 17 13:23:53 lonestar kernel: umass0: BBB bulk-in clear stall failed, STALLED
Nov 17 13:23:53 lonestar kernel: umass0: BBB bulk-out clear stall failed, STALLED
Nov 17 13:23:53 lonestar kernel: umass0: BBB reset failed, STALLED
Nov 17 13:23:53 lonestar kernel: umass0: BBB bulk-in clear stall failed, STALLED
Nov 17 13:23:53 lonestar kernel: umass0: BBB bulk-out clear stall failed, STALLED

and something in the moment KDE frozen, until camera was unplugged physically.
Then follow in log:

Nov 17 13:23:53 lonestar kernel: (da0:umass-sim0:0:0:0): removing device entry
Nov 17 13:23:53 lonestar kernel: umass0: at uhub1 port 2 (addr 2) disconnected
Nov 17 13:23:53 lonestar kernel: umass0: detached

So, when kernel found device da0 (~6 min after plugged) I can't mount it because computer hang on.

P.S.: Probably I should boot GENERIC kernel and try again.
May be it was my fault when I rebuild my own kernel...

[bsddaemon]

Can you post your kernel config file?

[Daemony]

Sure.

machine i386
cpu I686_CPU
ident LONESTAR
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=10240
options IPFIREWALL_FORWARD
options IPDIVERT
options DUMMYNET
options LIBICONV
options LIBMCHAIN
options NETSMB
options SMBFS
options QUOTA
options SC_PIXEL_MODE
options VGA_WIDTH90
options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK)
options VESA
device crypto
options IPSEC
options COMPAT_FREEBSD6
options COMPAT_43TTY
options UFS_GJOURNAL
options AUDIT
options GEOM_LABEL
options GEOM_PART_GPT
device uart
options SC_MOUSE_CHAR=0x3
options SCHED_ULE
options PREEMPTION
options INET
options FFS
options SOFTUPDATES
options UFS_ACL
options UFS_DIRHASH
options MSDOSFS
options CD9660
options PROCFS
options PSEUDOFS
options COMPAT_FREEBSD4
options COMPAT_FREEBSD5
options KTRACE
options SYSVSHM
options SYSVMSG
options SYSVSEM
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV
options AHC_REG_PRETTY_PRINT
options AHD_REG_PRETTY_PRINT
options ADAPTIVE_GIANT
device apic
device isa
device pci
device fdc
device ata
device atadisk
device atapicd
device atapifd
options ATA_STATIC_ID
device scbus
device ch
device da
device sa
device cd
device pass
device ses
device atkbdc
device atkbd
device psm
device vga
device splash
device sc
device agp
device pmtimer
device sio
device miibus
device fxp
device rl
device xl
device ed
device loop
device random
device ether
device sl
device ppp
device tun
device pty
device md
device bpf
device usb
device uhci
device ohci
device ehci
device ugen
device uhid
device ulpt
device umass

[Daemony]

Tried to boot with GENERIC kernel - nothing wonderful didn't happen.
Same errors...

[udragon]

Hi,

I got the same problem for the Olympus C370Z (which is also using the xD cards)

Here's a dmesg snippet :

umass0: <OLYMPUS X450/D535Z/C370Z, class 0/0, rev 1.10/0.00, addr 2> on uhub3
umass0: Get Max Lun not supported (STALLED)
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED

NOTE: The camera works fine on the same machine when booting under OpenSuse 10.3
*** lnx OpenSuse 10.3 dmesg log : ***
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 4:0:0:0: Direct-Access OLYMPUS X450/D535Z/C370Z 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sde] 256000 512-byte hardware sectors (131 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 06 00 00
sd 4:0:0:0: [sde] Assuming drive cache: write through
sd 4:0:0:0: [sde] 256000 512-byte hardware sectors (131 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 06 00 00
sd 4:0:0:0: [sde] Assuming drive cache: write through
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
*** END OpenSuse 10.3 dmesg log ***

[siffre]

I get the same errors for some usb flash drives. Sometimes directly when plugging in and sometimes while it's working. Annoying.
Have you tried plugging the xD card into an external card reader instead?