2578 I try to port pinta but I get compile error. [Archive] - The FreeBSD Forums
PDA

View Full Version : I try to port pinta but I get compile error.

sk8harddiefast
February 2nd, 2011, 13:02
Hi. I try to create a port for pinta (http://pinta-project.com/).
All dependencies are installed ok but when return to install pinta, I get this error:
===> Returning to build of pinta-0.6.1_1
===> pinta-0.6.1_1 depends on executable: imake - found
===> pinta-0.6.1_1 depends on executable: imake - found
===> Configuring for pinta-0.6.1_1
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking for pkg-config... /usr/local/bin/pkg-config
checking for xbuild... /usr/local/bin/xbuild
checking for mono... /usr/local/bin/mono
checking pkg-config is at least version 0.9.0... yes
checking for MONO... yes
checking for GLIB_SHARP_20... yes
checking for GTK_SHARP_20... yes
checking for MONO_CAIRO... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pinta

pinta-0.6

Build Environment
Install Prefix: /usr/local
XBuild Path: /usr/local/bin/xbuild
Mono Runtime: /usr/local/bin/mono
Launch Script: /usr/local/bin/pinta
Installation Directory: /usr/local/lib/pinta/

mv -f Makefile Makefile.bak
imake -DUseInstalled -I/usr/local/lib/X11/config
imake: No such file or directory
imake: No description file.
Stop.
*** Error code 1

My Makefile

# New ports collection makefile for: pinta
# Date created: 1 February 2011
# Whom: Ember George
#
# $FreeBSD$
#

PORTNAME= pinta
PORTVERSION= 0.6.1
PORTREVISION= 1
CATEGORIES= graphics
MASTER_SITES= http://cloud.github.com/downloads/jpobst/Pinta/pinta-0.6-1.tar.gz
DISTNAME= pinta-0.6-1
DISTFILES= pinta-0.6-1.tar.gz
MAINTAINER= sk8harddiefast@FreeBSD.org
COMMENT= A Lightweight And Simple Alternative To The GIMP For Gnome

BUILD_DEPENDS= monodevelop:${PORTSDIR}/devel/monodevelop \
mono:${PORTSDIR}/lang/mono \
gtk-sharp:${PORTSDIR}/x11-toolkits/gtk-sharp20 \
gnome-sharpx:${PORTSDIR}/11-toolkits/gnome-sharp20 \
gnome-libs:${PORTSDIR}/x11/gnome-libs \
imake:${PORTSDIR}/devel/imake

RUN_DEPENDS= ${BUILD_DEPENDS}

USE_LDCONFIG= yes
GNU_CONFIGURE= yes
USE_IMAKE= yes
MAN1= pinta.1
MANCOMPRESSED= yes

WRKSRC= ${WRKDIR}/pinta-0.6

.include <bsd.port.mk>

Also on more problem that I have is that cannot fetch the file. Say Forbidden. I must put it manually on /usr/ports/distfiles

Please a little help.
SirDice
February 2nd, 2011, 13:32
BUILD_DEPENDS= monodevelop:${PORTSDIR}/devel/monodevelop \
mono:${PORTSDIR}/lang/mono \
gtk-sharp:${PORTSDIR}/x11-toolkits/gtk-sharp20 \
gnome-sharpx:${PORTSDIR}/11-toolkits/gnome-sharp20 \
gnome-libs:${PORTSDIR}/x11/gnome-libs \
imake:${PORTSDIR}/devel/imake

This doesn't look correct. USE_IMAKE will take care of the imake dependency, no need to add it to the depends list. Also the Gnome libs can be included using USE_GNOME. Something like this:


USE_GNOME= gtksharp20 gnomesharp20


See /usr/ports/Mk/bsd.gnome.mk.
sk8harddiefast
February 2nd, 2011, 15:40
That confuse me is that pinta needs all gnome (Because I don't use gnome) But in reality needs monodevelop witch will download mono, mono-addins etc as dependency and gnome-libs (that will download all gnome as dependency) Also a mail from pinta developer, told me that I need gtk-shar20. No difference. (That too needs all gnome as dependency). That confused me. As dependecies that pinta needs, I must set all gnome packages or only gnome-libs and gtk-sharp20?
SirDice
February 2nd, 2011, 15:43
The simplest solution is to look for a port with similar dependencies and see how it's done there.
DutchDaemon
February 2nd, 2011, 16:54
I don't think the tarball's name belongs in the master site URL ..
sk8harddiefast
February 2nd, 2011, 20:57
I don't think the tarball's name belongs in the master site URL ..
What this mean? If you mean that this: These variables are defined in /usr/ports/Mk/bsd.sites.mk. There are new entries added all the time, so make sure to check the latest version of this file before submitting a port. witch I toked fron porters handbook, probably there is no entry for this URL and I guess this is the reason that say forbidden when try to download it :(
sk8harddiefast
February 4th, 2011, 07:39
Still cannot understand. According the Porter's Handbook:
BUILD_DEPENDS
This variable specifies executables or files this port requires to build.
The port require:
*Monodevelop
*gtk-sharp20

Everything else is dependencies that this 2 packages need.

Monodevelop needs
*Mono
*Mono-addins

gtk-sharp20 needs
*All gnome (gnome-panel, gnome-menus, gnome-destop, libgweather etc)

On BUILD_DEPENDS I must set The required ports. So
BUILD_DEPENDS= monodevelop:${PORTSDIR}/devel/monodevelop \
mono:${PORTSDIR}/lang/mono \
mono-addins:${PORTSDIR}/devel/mono-addins \
gtk-sharp20:${PORTSDIR}/x11-toolkits/gtk-sharp20 \
Right?
On USE_GNOME I have:
USE_GNOME= gnomehack libgnomeui gtksharp20 gnomesharp20

According /usr/ports/Mk/bsd.gnome.mk. I must use some of this:

# GNOME 2 components
_USE_GNOME_ALL+= atk atspi desktopfileutils eel2 evolutiondataserver gal2 gdkpixbuf2 \
gconf2 _glib20 glib20 gnomecontrolcenter2 gnomedesktop gnomedesktopsharp20 \
gnomedocutils gnomemenus gnomepanel gnomesharp20 gnomespeech gnomevfs2 gtk20 \
gtkhtml3 gtksharp10 gtksharp20 gtksourceview gtksourceview2 gvfs \
libartlgpl2 libbonobo libbonoboui libgailgnome libgda2 libgda3 libgda4 \
libglade2 libgnome libgnomecanvas libgnomedb libgnomekbd libgnomeprint \
libgnomeprintui libgnomeui libgsf libgsf_gnome libgtkhtml libidl \
librsvg2 libwnck libxml2 libxslt libzvt linc metacity nautilus2 \
nautiluscdburner orbit2 pango pygnome2 pygnomedesktop pygnomeextras \
pygtk2 pygtksourceview vte

But witch of them? Also If I set gtksharp20 on USE_GNOME= , then I must remove it from BUILD_DEPENDS= ?
Still get the same error :(
0