NanoPI R5S and FreeBSD 14

[none]

Hi folks,

I am looking for information on how to build FreeBSD 14 for this device. I got an image from the guy working on opnsense for it, FreeBSD 13.2 works. But only one NIC works.

If anyone can give a hint.

thanks,

none

 

[daviddpd]

I was playing with the RockPro64 the other day ... RockPro64 Image build - which is the Rk3399 ... the predecessor of the RK3568. It doesn't look like there is a boot loader in ports for RK3568/NanoPi R5S yet.
See if you can get the /usr/src/release/arm64/{file}.conf from the guy building the image.

Looks like the ethernet chips are :

Ethernet: Native Gigabit Ethernet x1, RTL8211F-CG chip
PCIe 2.5G Ethernet Ethernet x2, RTL8125BG chip
I'm guessing the the 2.5G aren't loading. I'm guessing the intel 2.5s are support but not the realtek yet.
Didn't read it yet ... but Realtek RTL 8125 2.5Gbps LAN controller.

There is forum thread on that.

I like this board too ... looking for a new router & IPSEC that will do 1Gbps ... (using a Juniper SRX550 now, a little power hungry).

 

[Slydder]

I currently have quite a few of htese devices as well as an aarch64/arm VM for dev work. the only thing I am missing currently is u-boot-nanopi-r5s. how can I build this?

thx